Child farm labor

Dee

  I recently read an article where you stated the farm labor laws needed to be changed. Why? We are doing just fine as far as I can tell. Has there been a big increase in injuries or deaths to children helping their grandpas and uncles on the ranch that I haven't heard about? 

 I paid my own way through most things as a kid working with horses, and my children worked horse back and hauling hay as they were growing up. It instilled one heck of a work ethic in them. It taught them how to be real men and women, and the value of a dollar. It is a big boost to a kids self esteem when the neighbors ask them to work, not because they are cheap, but because they are good hands. I look forward to my grand kids helping me on the ranch, and I'm smart enough to teach them how to work safely, just as my grandfather taught me.

 We are not all as stupid here on the ranch as some in the government believe. Please leave us alone.

 

Chad Cunningham

10693 cr 452

Cross Plains, Tx 76443

P.S. Might I suggest solitaire on your computer if you need something to do, instead of thinking up these asinine rules that don't do any thing but make things harder on a parent and rancher.

This is an email I sent to a Ms Dee Jepsen. She is with the dept. of labor, and, or, the dept. of food, drug, and biological engineering. Either way I am sick of the government treating me like I am stupid. It seems there are more rules every day, that help nothing or anybody. 

 If you haven't heard of the new rules they are proposing for farm labor, you should, hell, your kid won't even be able to mow his grandma's yard. Ridiculous!

tp://www.tenthamendmentcenter.com/2011/11/15/department-of-do-not-labor/

This kinda sums it up better than I can, after all I'm stupid, just ask the government.

WIP

Knives in various stages of handle installation. For these, I'm using Gorilla glue between the wood and steel, and 2 part epoxy between the wood and pins. I've tried every epoxy known, and the Gorilla has never failed me. A few of the others have. You just can't have any gaps between the wood and steel, but I really shouldn't have any way.

5 of a 10 knife order. Amboyna burl on 4, mesquite on the middle. These knives are 6" overall length, with a 2.5" cutting edge.

2 are 5160/8670/15n20 damascus, the middle is 1095/nickel.
I finished 2 more this afternoon, and should finish the other 3 tomorrow, unless something goes wrong. Then its off to the sheath maker.

Corrientes

 We have collected quite few corriente cows over the years. We keep most of our heifers from the roping pen, watch the sale barns and papers, and pick them up cheap two or three at a time.
 These cows will average about 900 pounds, live on almost nothing, and raise a calf as big as they are. They can cover a lot more ground in a day than any other breed, and will. They don't hang around the water or feed ground waiting, they get out and hustle.
 I put angus bulls with mine and get a good calf, most end up in the feed lot with the rest of our calves and do just fine.

Heat treating

Heat treating knives. If I don't get this part right, all the pretty you can put on one won't do any good. All it will be is a hunk of steel with a piece of wood glued on.

I put the blades in my oven and heat to a specific temperature(1550 degrees for this particular steel). When temp and time have been reached I dunk them in the bucket of oil on the floor.
 The oil is formulated for this purpose, and most important, has a high flash point which reduces the chance of my bucket catching on fire. Automatic transmission fluid works well, but I've set the bucket on fire more than once. And it ain't easy to put out. Motor oil doesn't work well, but some of the vegetable oils do.
I then put them back in the oven for a 2 hours at a specific temperature(350 degrees for this steel) to temper them. Tempering makes them where they are not as brittle.

These are the ones I did today. Still a long ways to go before they are a knife. And yes the shop cat is always in the way.

Just stuff

I came up with these meteorite pieces, and can't wait to try them in a billet of damascus. It may not be the best knife, but it will be a good conversation piece. I have some petrified dinosaur skin I might use for handle material on one, if I can figure out how to cut it.

Some pictures from the game camera behind the house. Not many people see two headed turkeys.

The hunters feed was a big success. Lots of people in town. I sold three knives in the couple of hours I was there, not a bad saturday for Cross Plains.

Deer season

But first, important stuff like spurs. Made from farriers rasps, old silver quarters for conchos.

Deer season starts in the morning. Traffic on our dirt roads has been dangerous for the past 2 days, lots more silver cans in the ditch, make sure the dogs stay home, count cattle sunday and monday and check for bullet wounds, direct lost hunters to the road they missed a mile back, and answer the question,"what do ya'll do out here".
 It's really not that bad( except for the traffic, slow down, it ain't the interstate). Cross Plains put on a big hunters feed tomorrow at noon, and my chamber of commerce bigwig daughter has set me up a booth to sell my knives from. 11 am - 3 pm, how bad could it be? She also informed me that I am now a member of the COC, even though I actually live and work in the  big city of Admiral. I will put my foot down when she tries to make me attend one of those meetings.
 http://www.jsartandsoul.com/, http://www.photojkc.com are her businesses. Take a look, she's pretty talented.

Rodeo spurs

I get to build rough stock spurs once in a while. I don't consider it a specialty or anything, I think I'm just a maker who listens and builds exactly what they want.
 The top is a set of 1 piece bareback spurs that will be at the NFR in December. I will bet he has the only one piece spurs there. 10 points to anyone that can name him!
 The next will be at the NFR in a couple of years. These are welded. I'm not sure I can forge these and keep a clean line and straight shank on these skewed ones.

A cold front is blowing through. Might be a good day to hang around the forge tomorrow. I have a lot to forge, spurs, buckles, and knives, all on the Christmas list. It's coming fast.